Fittings For 6 & 4 mm OD Tube

  • Home
  • Fittings For 6 & 4 mm OD Tube
Banjo
MODELSTECHNICAL SPECIFICATIONS
LB - 6
(M10x1)		 Male thread M10x1 for 6mm OD Tube, used for right angle connection of tube.
Elbow Blocks
MODELSTECHNICAL SPECIFICATIONS
LEB - 4For joining two tubes at right angle of 6mm OD & 4 mm OD tube.
LEB - 6For joining two tubes at right angle of 6mm OD & 6 mm OD tube.
Tee Blocks
MODELSTECHNICAL SPECIFICATIONS
LT - 4For dividing main line into Three lines of 4 mm OD tube.
LT - 6For dividing main line into Three lines of 6 mm OD tube.
Cross Blocks
MODELSTECHNICAL SPECIFICATIONS
LCR - 4For dividing main line into Four lines of 4 mm OD tube.
LCR - 6For dividing main line into Four lines of 6 mm OD tube.
Tee Blocks
MODELSTECHNICAL SPECIFICATIONS
LT - 4For dividing main line into Three lines of 4 mm OD tube.
LT - 6For dividing main line into Three lines of 6 mm OD tube.
Connector Blocks
MODELSTECHNICAL SPECIFICATIONS
LC - 4For joining two tubes of 4mm OD tube.
LC - 6For joining two tubes of 6mm OD tube.
Elbows (taper Threads)
MODELSTECHNICAL SPECIFICATIONS
LE-4T ( 1 /8”BSP or M8x1)Male threa1d /8” BSP (taper thread ) for right angle connection of lubrication point with Respective female tapping i.e. for 4mm OD tube.
Male threa1d /8” BSP (taper thread ) for right angle
LE – 6T ( 1 /8”BSP )connection of lubrication point with Respective female tapping i.e. for 6mm OD tube.
Straight Connector (taper Threads)
MODELSTECHNICAL SPECIFICATIONS
LSC-4T ( 1/8"BSP or M8x1)To connect 4mm OD tube at end point of Machine.
LSC-4T ( 1/4"BSP)To connect 4mm OD tube at end point of Machine.
LSC-6T ( 1/8"BSP or M8x1)To connect 6mm OD tube at end point of Machine.
LSC-6T ( 1/4"BSP)To connect 6mm OD tube at end point of Machine.
Clamps
MODELSTECHNICAL SPECIFICATIONS
LC – 4 – 1To clamp Single 4mm OD tube.
LC – 4 – 2To clamp Double 4mm OD tubes.
LC – 4 – 3To clamp Triple 4mm OD tubes.
LC – 6 – 1To clamp Single 6mm OD tube.
LC – 10 – 1To clamp Single 10mm OD tube.
Screws
MODELSTECHNICAL SPECIFICATIONS
M5 x 8For fixing Clamps, Tee Blocks, Cross Blocks, Manifolds etc.
M5 x 20For fixing Clamps, Tee Blocks, Cross Blocks, Manifolds etc.
M5 x 30For fixing Clamps, Tee Blocks, Cross Blocks, Manifolds etc.
Locking Screw
MODELSTECHNICAL SPECIFICATIONS
LS - 4For solderless connection of 4mm OD tube.
LS - 6For solderless connection of 6MM OD tube.
Locking Cone (Ferule)
MODELSTECHNICAL SPECIFICATIONS
LC - 4 (Brass)Material brass, ID - 4mm & 6mm Material All. / Brass / M.S. ID -10mm.
LC - 6 (Brass)Material brass, ID - 4mm & 6mm Material All. / Brass / M.S. ID -10mm.
LC - 10 (Aluminium)Material (Aluminium), ID - 4mm & 6mm Material All. / Brass / M.S. ID -10mm.
Sealing Washer
MODELSTECHNICAL SPECIFICATIONS
SW – 8Material Copper , ID – 8mm.
SW – 10Material Copper , ID – 10mm.
SW – 1/4”Material Copper , ID – 15mm.
Scroll to Top