Spares

  • Home
  • Spares
Float Switch
MODELSTECHNICAL SPECIFICATIONS
LFSH – 01 / 02 For sensing min. oil level electrically with NO or NC, Top ON or Bottom ON contact. Horizontally / Vertically. 220V AC / 24V DC, 1 AMP.
LFSV – 01 / 02 For sensing min. oil level electrically with NO or NC, Top ON or Bottom ON contact. Horizontally / Vertically. 220V AC / 24V DC, 1 AMP.
Pressure Switch
MODELSTECHNICAL SPECIFICATIONS
LPS – 020Pressure range 0-20 Kg/Cm² (adj.) 220 V AC, 5 Amp.,POTENTIAL FREE)
Oil Filler Cum Air Breather
MODELSTECHNICAL SPECIFICATIONS
LFCB - 45Provision for oil filling with cover and Filter (small size).
LFCB - 75Provision for oil filling with cover and Filter (big size).
Pressure Gauge
MODELSTECHNICAL SPECIFICATIONS
LCR - 4For dividing main line into four lines of 4 mm OD tube.
LCR - 6For dividing main line into four lines of 6 mm OD tube.
Sight Glass
MODELSTECHNICAL SPECIFICATIONS
LSG – 25Tube dia 25mm OD., Inlet & outlet port ⅛” BSP, Working Pressure – 10Kg/ Cm².
LSG – 38Tube dia 38mm OD., Inlet & outlet port ¼” BSP, Working Pressure – 15Kg/ Cm².
In Line Filter
MODELSTECHNICAL SPECIFICATIONS
LIF - 13Inline filter for Oil & Grease upto 149 micron filtration. Inlet & outlet port - 1/4" BSP.
LIF - 25Basket Inline filter-149 micron, 1/4" BSP. Working Pressure - 10Kg/ Cm².
Tube Bender
MODELSTECHNICAL SPECIFICATIONS
LTB - 6Use for bending of Copper/Allum./Steel tube of 4/6mm OD bending upto 180°.
LTB - 10Use for bending of Copper/Allum./Steel tube of 8/10mm OD bending upto 180°.
Tube Cutter
MODELSTECHNICAL SPECIFICATIONS
TC - 316For flareless cutting of steel tubes. Cutting range 3-16 mm OD tube.
Coupling
MODELSTECHNICAL SPECIFICATIONS
LC-050To coupled motor & pumps. in hydraulic & lub. Systems (JAW Coupling)
LC-075To coupled motor & pumps. in hydraulic & lub. Systems (JAW Coupling)
LC-095To coupled motor & pumps. in hydraulic & lub. Systems (JAW Coupling)
Relief Valve
MODELSTECHNICAL SPECIFICATIONS
LRV - 030Used for pr. setting in the Hydraulic & Lubrication systems. From 0 to 30 kg/cm². Tank mounted.
LRV - 0350Used for pr. setting in the Hydraulic & Lubrication systems. From 0 to 350 kg/cm². Tank / Plate mounted.
Level Gauge
MODELSTECHNICAL SPECIFICATIONS
LG - 120UTo use in Lub. Units / Hyd. Tanks. Length-5"
LG - 75PTo use in Lub. Units / Hyd. Tanks. Length-3"
Level Gauge
MODELSTECHNICAL SPECIFICATIONS
LSS - 08For DMLU-03, 05 & 08 Lubrication Units (25/50/10mm size) For oil Recirculating Systems PP - 6 & PP - 10 (50/67/ 1/4" BSP size), 149 micron, SS MESH.
LSS - 30For DMLU-03, 05 & 08 Lubrication Units (25/50/10mm size) For oil Recirculating Systems PP - 6 & PP - 10 (50/67/ 1/4" BSP size), 149 micron, SS MESH.
Plugs
MODELSTECHNICAL SPECIFICATIONS
LP - 8To Plug extra manifold ports, Thread M8 x1 with washer
LP - 10To Plug extra manifold ports, Thread M10 x1 with washer
LP - 1/4" BSPTo Plug extra manifold ports, Thread 1/4" BSP with washer
LP - 1/2" BSPTo Plug extra manifold ports, Thread 1/2" BSP with washer
LP - 22X1.5To Plug extra manifold ports, Thread M22 x1.5 with washer
Scroll to Top